made following changes. 
31 was 224 down, changed to 202 for voice on power, swr and so forth.
32 was 225, up. changed to 019 to switch between vfo and memory and back.
put these back and added to function keypad. 


Menu 0 for function keys. 
x0-15 PF A: Key Assignment Assignment of the programmable 
function to [PF A] 
Refer to the programmable 
function key list. VOICE 2 16-6 
0-16 PF B: Key Assignment Assignment of the programmable 
function to [PF B] 
Refer to the programmable 
function key list. VOICE 3 16-6 
0-17 VOICE (Main Band): Key Assignment Assignment of the programmable 
function to [VOICE] (M) 
Refer to the programmable 
function key list. 
VOICE1 
(Main Band) 16-6 
0-18 VOICE (Sub Band): Key Assignment Assignment of the programmable 
function to [VOICE] (S) 
Refer to the programmable 
function key list. 
VOICE1 (Sub 
Band) 16-6 
0-19 External PF 1: Key Assignment Assignment of the programmable 
function to [PF 1] (Keypad) 
Refer to the programmable 
function key list. 
MessageMemory CH1 16-7 
0-20 External PF 2: Key Assignment Assignment of the programmable 
function to [PF 2] (Keypad) 
Refer to the programmable 
function key list. 
MessageMemory CH2 16-7 
Display Configuration Range Default Reference 
Page 
0-21 External PF 3: Key Assignment Assignment of the programmable 
function to [PF 3] (Keypad) 
Refer to the programmable 
function key list. 
MessageMemory CH3 16-7 
0-22 External PF 4: Key Assignment Assignment of the programmable 
function to [PF 4] (Keypad) 
Refer to the programmable 
function key list. 
MessageMemory CH4 16-7 
0-23 External PF 5: Key Assignment Assignment of the programmable 
function to [PF 5] (Keypad) 
Refer to the programmable 
function key list. 
MessageMemory CH5 16-7 
0-24 External PF 6: Key Assignment Assignment of the programmable 
function to [PF 
6] (Keypad) 
Refer to the programmable 
function key list. 
MessageMemory CH6 16-7 
0-25 External PF 7: Key Assignment Assignment of the programmable 
function to [PF 7] (Keypad) 
Refer to the programmable 
function key list. 
MessageMemory CH7 16-7 
0-26 External PF 8: Key Assignment Assignment of the programmable 
function to [PF 
8] (Keypad) 
Refer to the programmable 
function key list. 
MessageMemory CH8 16-7 
0-27 Microphone PF 1: Key Assignment Assignment of the programmable 
function to [PF 1] (microphone) 
Refer to the programmable 
function key list. MAIN 16-7 
0-28 Microphone PF 2: Key Assignment Assignment of the programmable 
function to [PF 2] (microphone) 
Refer to the programmable 
function key list. 
TX (SubBand), (SplitFrequency) 
16-7 
0-29 Microphone PF 3: Key Assignment Assignment of the programmable 
function to [PF 3] (microphone) 
Refer to the programmable 
function key list. SUB 16-7 
0-30 Microphone PF 4: Key Assignment Assignment of the programmable 
function to [PF 4] (microphone) 
Refer to the programmable 
function key list. 
M.V 
(Memory) 16-7 
0-31 Microphone DOWN: Key Assignment Assignment of the programmable 
function to [DOWN] (Microphone) 
Refer to the programmable 
function key list. 
DOWN Key 
(Microphone) 16-7 
0-32 Microphone UP: Key Assignment Assignment of the programmable 
function to [UP] (Microphone) 
Refer to the programmable 
function key list. 
UP Key 
(microphone) 16-7 
0-33 Automatic Power Off APO (Automatic Power Off) Off/ 60/ 120/ 180 [min] Off 15-7 


List of Functions for Key Assignment 

List of Functions for Key AssignmentOperation and activation of function assigned 
Press to access a menu ranging from 0-00 to 9-03.
For details, refer to "Menu". {page 3-2} 
   *000.  AT/AT TUNE   
Press to tune the signal using and via the internal 
antenna tuner or leave the signal not tuned by 
bypassing (through) the internal antenna tuner.
Press and hold to begin tuning the internal antenna 
tuner. 
   *001.  VOX/SEL 
Press to toggle the VOX function between active and 
inactive. 
Press and hold to open the VOX Level screen. 
   *002.  PROC/SEL 
Press to toggle the Speech Processor between 
active and inactive. 
Press and hold to open the Speech Processor 
screen. 
   *003.  ANT1 Press to select ANT 1. 
   *004.  ANT2 Press to select ANT 2. 
   *005.  ANT3 Press to select ANT 3. 
   *006.  ANT4 Press to select ANT 4. 
   *007.  DATA 1/SEL 
Press this key to select Data 1.
Press and hold to open the Modulation Source 
screen. 
   *008. DATA 2/SEL 
Press this key to select Data 2.
Pressing and holding this key opens the Modulation 
Source screen. 
   *009.  DATA 3/SEL 
Press this key to select Data 3.
Pressing and holding this key opens the Modulation 
Source screen. 
   *010. RX (Main Band) 
Press to place the transceiver, with the dual band 
in the receive state, in the receive state using the 
single band. 
   *011.  TX (Main Band) Press to allow the transceiver to transmit using the 
main band frequency (Simplex). 
   *012.  M>S 
Press to copy the operating data such as the 
main band frequency and operating mode to the 
operating data for the sub band. 
   *013.  M/S Press to toggle the reception capability for the sub 
band between active and inactive. 
   *014.  RX (Sub Band) Press to toggle the dual-band watch (reception) 
between ON and OFF.    
   *015.  TX (Sub Band)/
(Split Frequency) 
Press to configure the transmit functions to the sub 
band frequency and place the transceiver in the split 
mode. 
Press and hold to enable the configuration for split 
frequency.
This is the default for Menu 28, "Microphone PF 1: Key Assignment". 
   *016.  TF-SET While [TF-SET] is pressed down, the transceiver 
receives on the transmit frequency. 
   *017.  MAIN 
Press to select the main band. 
This is the default for Menu 27, "Microphone PF 2:
   *018.  Key Assignment". 
SUB 
Press to select the sub band. 
This is the default for Menu 29, "Microphone PF 3:
   *019.  Key Assignment". 
M/V (Memory) 
Each time you press this key, the operating mode 
toggles between Memory Channel mode and VFO 
mode. 
   *020.  M.IN (Memory) Press to toggle the memory scroll mode between 
active and inactive. 
   *021.  M>V (Memory) 
The operating data configured for the Memory 
Channel will be copied to the VFO.
This is the default for Menu 30, "Microphone PF 4:
   *022.  Key Assignment". 
REC (Recorder)/ 
Full-time REC 
Each time you press this key, normal recording 
starts. 
Press and hold to start constant recording. 
   *23.  STOP (Recorder) Press to stop recording or playback. 
   *24.  PLAY (Recorder) 
Press to play back the latest audio file recorded in 
normal or constant recording mode. Press this key 
during playback to pause. 

Parameter 
   *25. S.DISP/SEL 
Operation and activation of function assigned 
Each time you press this key, the display contents 
for the sub-screen changes.
Each time you press and hold this key, the 
highlighted display toggles between active and 
inactive. 
   *26.  MR/SEL (QuickMemory) 
Each time you press this key, the Quick Memory 
mode toggles between active and inactive.
Press and hold to clear all the operating data stored 
in Quick Memory Channels. 
   *27.  M.IN (QuickMemory) Press to save data in Quick Memory Channels. 
   *28.  CW T. (Main 
Band) Press to activate CW auto tuning for the main band. 
   *29.  FIL A/SEL (MainBand) 
Press to select the RX Filter A for the main band. 
Press and hold to open the Receive Filter screen. 
   *30.  FIL B/SEL (MainBand) 
Press to select the RX Filter B for the main band. 
Press and hold to open the Receive Filter screen. 
   *31.  FIL C/SEL (MainBand) 
Press to select the RX Filter C for the main band. 
Press and hold to open the Receive Filter screen. 
   *32.  AGC SEL (Main 
Band) 
Press to open the AGC screen for the main band. 
The transceiver does not behave even if you press 
and hold this PF key. 
   *33.  AGC SLOW (Main 
Band) 
Press to select "Slow" for the Automatic Gain 
Control speed for the main band. 
   *34.  AGC MID (Main 
Band) 
Press to select "Medium" for the Automatic Gain 
Control speed for the main band. 
   *35.  AGC FAST (Main 
Band) 
Press to select "Fast" for the Automatic Gain Control 
speed for the main band. 
   *36.  AGC OFF (Main 
Band) 
Press to disable the Automatic Gain Control for the 
main band. 
   *37.  NCH SEL (MainBand) 
Press to select either narrow or wide for the notch 
filter bandwidth. The transceiver does not behave 
even if you press and hold this PF key. 
   *38.  A.NCH SEL (MainBand) 
Press to open the Auto Notch Filter screen. The 
transceiver does not behave even if you press and 
hold this PF key. 
   *39.  BEF SEL (MainBand) 
Press to open the Band Elimination Filter screen 
for the main band. The transceiver does not behave 
even if you press and hold this PF key. 
   *40.  APF SEL (MainBand) 
Press to open the Audio Peak Filter screen for the 
main band. The transceiver does not behave even if 
you press and hold this PF key. 
   *41.  MUTE (MainBand) Press to mute the audio for the main band. 
   *42.  CW T. (Sub Band) Press to start CW auto tuning for the sub band. 
   *43.  FIL A/SEL (SubBand) 
Press to select the RX Filter A for the sub band. 
Press and hold to open the Receive Filter screen. 
   *44.  FIL B/SEL (SubBand) 
Press to select the RX Filter B for the sub band. 
Press and hold to open the Receive Filter screen. 
   *45.  FIL C/SEL (SubBand) 
Press to select the RX Filter C for the sub band. 
Press and hold to open the Receive Filter screen. 
   *46.  AGC/SEL (Sub 
Band) 
Press to open the AGC screen for the sub band. The 
transceiver does not behave even if you press and 
hold this PF key. 
   *47.  AGC SLOW (Sub 
Band) 
Press to select "Slow" for the Automatic Gain 
Control speed for the sub band. 
   *48.  AGC MID (Sub 
Band) 
Press to select "Medium" for the Automatic Gain 
Control speed for the sub band. 
   *49.  AGC FAST (Sub 
Band) 
Press to select "Fast" for the Automatic Gain Control 
speed for the sub band. 
   *50.  AGC OFF (Sub 
Band) 
Press to disable the Automatic Gain Control for the 
sub band. 
   *51.  NCH SEL (SubBand) 
Press to select either narrow or wide for the notch 
filter bandwidth for the sub band. The transceiver 
does not behave even if you press and hold this PF 
key. 
   *52.  A.NCH/SEL (SubBand) 
Press to open the Auto Notch Filter screen. The 
transceiver does not behave even if you press and 
hold this PF key. 
   *53.  BEF SEL (SubBand) 
Press to open the Band Elimination Filter screen 
for the sub band. The transceiver does not behave 
even if you press and hold this PF key. 


Index 

Contents 

Parameter 
   *54.  NB1 SEL (SubBand) 
Parameter 
NB1 SEL (SubBand) 
   *55.  NB2 SEL (SubBand) 
Press to open the Noise Blanker 2 (Sub Band)
screen. The transceiver does not behave even if you 
press and hold this PF key. 
   *56.  NR1 SEL (SubBand) 
Press and hold to open the Noise Reduction 
1 (Sub Band) screen for the sub band. The 
transceiver does not behave even if you press and 
hold this PF key. 
   *57.  NR2 SEL (SubBand) 
Press and hold to open the Noise Reduction 
2 (Sub Band) screen for the sub band. The 
transceiver does not behave even if you press and 
hold this PF key. 
  *58.  APF/SEL (SubBand) 
Press to open the Audio Peak Filter screen for the 
sub band. The transceiver does not behave even if 
you press and hold this PF key. 
   *59.  MUTE (Sub Band) Press to mute the audio of the sub band. 
  *200.  *60.  VOICE 1 (Main 
Band) 
Press to enable the voice guidance of the main band 
frequency.
This is the default for Menu 17, "VOICE (Main Band):
Key Assignment". 
   *201.  *61.  VOICE 2 
Press to emit a voice guidance, such as a value for 
the signal strength of the selected band during the 
receive, and a value for transmit power during the 
transmit. 
This is the default for Menu 15, "PF A Key: Key 
Assignment". 
   *202.  *62.  VOICE 3 
Press to emit a voice guidance, such as a value of 
the selected with [METER] (F). The transceiver does 
not emit the voice guidance during the reception.
This is the default for Menu 16, "PF B Key: Key 
Assignment". 
  *203.  *63.  VOICE 1 (Sub 
Band) 
Press to enable the voice guidance of the sub band 
frequency.
This is the default for Menu 18, "VOICE (Sub Band):
Key Assignment". 
   *204.  *64.  DSP MONITOR While you are holding down this key, the passband 
width of the IF filter is expanded to maximum. 
   *205.  *65.  RX MONITOR While you are holding down this key, the squelch 
opens. 
   *206.  *66.  TX TUNE Press to start the TX tuning. 
   *207.     *67.  DATA SEND 
Press to transmit the signal entered via the 
modulation source (rear panel) configured for each 
audio source. 
   *208.  *68.  SEND 
Press to place the transceiver into a transmit state.
Press again to revert the transceiver to the original 
state. 
   *209.  *69.  DATA VOX/SEL 
Each time you press this key, the modulation line 
cycles as follows: Off > ACC 2 > USB > OPT.
Press and hold to open the Modulation Source 
screen. 
   *210.  *70.  Message Memory 
CH1 
Press to transmit the Voice message, the CW 
message, FSK message, or PSK message stored in 
channel 1. 
This is the default for Menu 19, "External PF 1: Key 
Assignment". 
   *211.  *71.  Message Memory 
CH2 
Press to transmit the Voice message, the CW 
message, FSK message, or PSK message stored in 
channel 2. 
This is the default for Menu 20, "External PF 2: Key 
Assignment". 
  *212.  *72.  Message Memory 
CH3 
Press to transmit the Voice message, the CW 
message, FSK message, or PSK message stored in 
channel 3. 
This is the default for Menu 21, "External PF 3: Key 
Assignment". 
   *213.  *73.  Message Memory 
CH4 
Press to transmit the Voice message, the CW 
message, FSK message, or PSK message stored in 
channel 4. 
This is the default for Menu 22, "External PF 4: Key 
Assignment". 

Parameter 
   *214.  *74.  Message Memory 
CH5 
Operation and activation of function assigned 
Press to transmit the Voice message, the CW 
message, FSK message, or PSK message stored in 
channel 5. 
This is the default for Menu 23, "External PF 5: Key 
Assignment". 
   *215.  *75.  Message Memory 
CH6 
Press to transmit the Voice message, the CW 
message, FSK message, or PSK message stored in 
channel 6. 
This is the default for Menu 24, "External PF 6: Key 
Assignment". 
   *216.  *76.  Message Memory 
CH7 
Press to transmit the CW message, FSK message, 
or PSK message stored in channel 7.
This is the default for Menu 25, "External PF 7: Key 
Assignment". 
   *217.  *77.  Message Memory 
CH8 
Press to transmit the CW message, FSK message, 
or PSK message stored in channel 8.
This is the default for Menu 26, "External PF 8: Key 
Assignment".
   *218.  *78.  Contest Number 
Decrement 
Press to subtract the contest number by one. (CW 
Mode)
   *219.  *79.  SWL Press to place the transceiver into SWL mode. 
   *220.  *80.  RF Scope Press to display the bandscope. 
   *221.  *81.  AF Scope Press to display the audio scope. 
   *222.  *82.  Waterfall Press to display the waterfall. 
   *223.  *83.  Extended Memory 
Channel Press to invoke the Extended Memory Channel. 
   *224.  *84.  Down Key 
(Microphone) 
Press to operate the transceiver in the same 
manner as when the [DOWN] key of the optional 
microphone is pressed.
This is the default for Menu 31, "Microphone DOWN:
Key Assignment". 
   *225.  *85.  Up Key 
(Microphone) 
Press to operate the transceiver in the same manner 
as when the [UP] key of the optional microphone is 
pressed.
This is the default for Menu 32, "Microphone UP:
Key Assignment". 
    *226.  *86.  Capture 
Press to capture the screen images in the main 
screen and the sub-screen and save them as image 
files to a USB flash drive. 
   *227.  *87.  Safe Removal of 
the USB Flash 
Drive 
Press to execute Safe Removal of the USB Flash 
Drive 
   *228.  *88.  Emergency 
Frequency 
Press to call using the frequency allocated to notify 
the emergency call frequency on the main band. 
   *89.  Off Nothing is activated. 


`